Custom Embroidery Designs
The custom embroidery machine is at the moment most commonly used for the creation of custom embroidery or embroidery custom. Custom machine embroidery increases the beauty of the outfit, fabric, garment or any other material on which it is created. The further addition of custom embroidery digitizing increases the elegance of the outfit, fabric, garment or any other material to many folds. Custom Embroidery Designs is created by the help of embroidery digitizing software that is specific for the custom embroidery.
The innovative sketch or any image can be taken as a starting material for the creation of custom embroidery designs and patterns. If you are beginner then you should select that surface on which the decoration is not to make. The selection of an exacting theme is made for the creation of custom embroidery. It is repeated at a specific interval of time and dimensions on the surface of the fabric. The type of the embroidery machine selects the transfer of the custom patches on the fabric.
The general guidelines for the construction of custom embroidery include:
Any theme is selected for the creation of custom embroidery patches for e.g. flowers, leaves, vines, scrolls etc. Their repetition is made. The dimensions of the field of embroidery should be pre kept in the mind during the process of selection of theme. It should be noted that the dimension of the attachment of hoop of the embroidery machine is actually the dimension of the field of embroidery.
The distance between the placements of each theme is measured by the help of a measuring device for e.g. scale. By the help of the measurement as well as the distance of the placement of theme that was done in the above step, the theme will be drawn on a drawing paper by the help of a draft pencil. For this purpose, a comprehensible chart ruler should be used for the accurate placements and the theme is drawn. Is the embroidery digitizing software is being used then the theme is scanned in the digitizing software program? Repeat tool is used here. Repeat tool is meant for the repetition of the features is made in the program after the activation of repeat tool.
There will be continuation I the drawing of the theme until the completion of the embroidery repeat patterns. The similar measurements for the spacing of the distance will be used in the mean while. Tailor chalk is taken and used for tracing out the repeat placements on the surface of the fabric. A vanishing ink pen is used with the ink which is soluble in water and disappears after the washing process. The pen should have a thin and pointed tip and it is used in case of those lines which are fine. The trace will guide you through the creation of custom embroidery.
Taking the weight of the fabric, the fabric is stabilized. In this process, a sheet of a suitable stabilizer is added to the fabric. It helps in the strengthening of the fabric and keeps the fabric as firm as possible during the application of custom embroidery. In the case of a light fabric, a heavy stabilizer should be used and in the case of a heavy fabric, a light stabilizer should be used. It a general rule for the selection of best stabilizer for any fabric.
Hoop the fabric and finally go for the custom embroidery as well as custom embroidery digitizing by the help of Custom machine embroidery.